Writing is a vital skill that you need for your daily life today. Though majority of people say that advanced technology have made devices like computer so you don’t need to write, but here I’m not talking about writing in a paper instead I’m talking about the writing skills such that how to write a business letter or appointment letter?
All these technical writing starts from a general writing that we have done since our secondary grades called essay. In a sentence an essay can be defined as a short piece of writing on one subject. For me writing an essay has always been a hectic task. When I was in grade four my teacher used to let me write about animals and the instruction was just to describe about it, but as I grew up, I realize essay is not just an attempt to describe something; rather it is making somebody understand what you are writing about. The more I learned about the essays, it got more complex and I thought why can’t I buy essay?

My assignment used to get rejected frequently and I started working harder and harder gradually I succeeded, but not to the achievement that I desired. My essay used to have a lots grammatical errors and others. And I wish to get an essay editing service, but where? I was totally blank about it after all it was just my thought.
Finally, I decided to go for online search. Within the chain of various websites it was a difficult task to get the reliable one. But I successes as I found customwriting.org where you can online purchase essay as well as essay editing service in reasonable prices.

‘Blank DVD’ refers to a variety of disc formats. But the thing that should be concerned more is, which format or brands are the referred by the DVD drive manufacturers. As brands like Taiyo Yuden Dvd-R may have one recommendation and other manufacturer may have different recommendation.

When we talk about DVD or format of blank dvd, it can be mainly of two types:-

1. DVD -R
2. DVD + R

DVD -R

It is the most common format found in almost every country and it covers a huge share at the market. DVD-R has capacity of recording 4.7 GB, which is equal to 120min of high quality video. You cannot erase or rewrite data on this type of DVD once you have “burned” the data in it.

DVD+R

It is almost the same to DVD-R in context at appearance, capacity and performance, but the difference is in writing technology. Technically DVD+R is slightly better. The technology used in it is better in comparison to DVD-R.

The thing that is to be noted is, although it is mentioned that DVD disc can record 4.7 GB of data, it actually only records 4.3 GB. Both the above mentioned disc has specific writing speed. The latest media has writing speed of 16x, which means it can fully write in around seven minutes. But, there are also lots of other factors that affect writing speed of a disc.

]]> http://askmesolution.com/2011/09/how-to-find-blank-dvd-media.html/feed 0 http://askmesolution.com/2011/09/marvelous-dinning-experience.html http://askmesolution.com/2011/09/marvelous-dinning-experience.html#comments Sat, 17 Sep 2011 12:31:13 +0000 admin http://askmesolution.com/?p=419 Catering in Catonsville could be a shrewd choice because we endeavor to exceed our customer expectation and will leave no stone unturned to meet our guest satisfaction. We will not regard as our job done until and unless that goal is achieved with each and every customer arrived here. Whether you are planning to have wedding parties, cocktail dinner, family gathering or any special event, please do remember us for the best experience. Catering in Catonsville will be a new experience as we provide you dining facility with exceptional service and something truly remarkable recipe.

Literally, meaning of catering is looking after the guest or taking care of guest in a friendly and generous manner. So we are here for the same. We are committed to achieving excellence through quality food and service in a manner which meets our client’s expectation and achieves the highest level of customer satisfaction. There is no limit what and where to serve you. We offer complete catering service from picnic to glamorous fine dining.

Wine stain removal on furniture can be removed by wiping the liquid immediately by rubbing a solution on linseed oil and cigarette ash. If wine or alcohol is spilled, sponge a cloth dipped in warm water. If the stain still remains, then apply a mild detergent solution. If a brown stain remains, apply a few drops of hydro peroxide.
Wine stain removal on carpet can be done by soaking in a solution made by mixing detergent powder, glycerin and warm water. Read the given steps carefully and repeat as necessary to remove white wine stain.
1. Rinse the stained area with cold water from the back of the white wine stain.
2. Rub the white wine stain with dish detergent and leave it for 5-7 minutes.
3. If the stain still persists, apply liquid detergent and soak in cold water for 30min
4. Rinse thoroughly
5. After that apply a spot stain remover stick, a spray or a gel and wash according to clothing directions.

Always start your exercise with warm up after finishing setup of TRX, do jogging which makes your body warm. After warm ups, go for stretching with TRX which helps you develop your resistance. When you finish stretching, do some arm workouts. For this, simply replace dumbbells with TRX. When you are done with arm workout go for training with your legs under TRX and its over.

If you simply follow the above schedule under TRX, it is definitely going to give you result. Keep in mind that if you don’t follow proper instruction you may get injured.

TRX suspension trainer is regarded as the most multipurpose part of work out equipment available in the present market. It weighs less than two pounds, but has the potential to deliver the same amount of performance and functionality that you would find with the bigger and the more expensive equipment. It is quite easy to setup too. You can get it set up in seconds and get started with the training procedure at home, in gym or maybe even while you are at the road. So, it can be considered all-in-one package for your daily exercise needs.

1. With the help of dull knife or spoon, pull out excess oil as much as possible.
2. Apply liquid detergent and rub through the stained fabric.
3. Leave the garment for few minutes.
4. After about 10min, wash the garment in the hottest water but before that be sure about precautions that must be take while washing the fabric according to its tag.

To keep your kitchen out of stain is to reduce the use of oil and most importantly treat the stain as soon as possible.

Fortunately, with the development of medical science, now you will never have to ask “how to get rid of acne”. Along with the traditional medical treatments, there are also few additional cures to acne which includes acupuncture, Chinese medicine and herbs. Here, the main strategy is to choose the best treatment plan which will help your personalized need.

Even though these types of treatment may cure acne problems, you should always keep in mind that only healthy lifestyle habits will keep them from growing back in your skin.

]]> http://askmesolution.com/2011/09/cure-acne-exists.html/feed 0 http://askmesolution.com/2011/09/getting-your-ex-back-2.html http://askmesolution.com/2011/09/getting-your-ex-back-2.html#comments Thu, 01 Sep 2011 19:26:21 +0000 admin http://askmesolution.com/?p=388 How to win ex back? If you have recently split up with your ex and your attempts are falling in your battle to win you ex back, one thing you have to understand is there are plenty of ways to patch things up in your relation. So, even if you feel like you have tried everything, there may be still some ways left to sneak back into your ex’s arms.
Before you begin, make a decent effort to accept that your relationship has indeed broken up. Stalking, spying, calling or texting incessantly is completely inappropriate and will decrease you chances of winning your ex back. Also keep in mind not to give all the power to your ex. Don’t sacrifice your happiness to provide your ex with everything s/he wants. This may seem reasonable to win ex back but it will only lead to a very unhappy relationship and sooner or later you will end up being single again. So, be sure to be strong and patient.

Though it can be costly while installation, many solar farmers say that it is worth the investment. You can put the solar panels atop your house or on your barren land and convert the solar energy to electrical energy. The sun does the entire job and leaves you free to do other jobs.
Solar farms are also very environment friendly. They do not pollute air, water or land and make no noise. So solar farm is a really good alternative in terms of economy and energy.

]]> http://askmesolution.com/2011/08/%e2%80%98green%e2%80%99-alternative-fossil-fuels.html/feed 0 http://askmesolution.com/2011/08/thinking-solar-panel.html http://askmesolution.com/2011/08/thinking-solar-panel.html#comments Sun, 28 Aug 2011 13:12:26 +0000 admin http://askmesolution.com/?p=374 This article will be more fruitful for those who are searching for solar energy because here we are suggesting you some tips for choosing a solar panel. The hike in the cost of traditional energy source increased the demand of alternative energy. And solar energy is one of the most acclaimed alternative energy. Following are the tips for choosing solar panels.

1. The initial investment for installing a solar panel is high. So consider the brand, your energy requirement and certification to minimize your cost.
2. Generally warranty period in solar panel is 25-30 years, but some only provide 10 years so beware of this.
3.  Consider your wattage requirement then only decide the size of the solar panel.
4. Three types of cells are found and each has their own characteristics. Consult with expert to get one that fits your home

If you consider above tips, definitely you can get an easy access to solar energy without regretting for your decision in the future.

People are very much concerned about height these days. If you think you have got height problems like you are not tall enough, or you think you’re humiliated in your friend circle because of your short height then please don’t panic. We’ve got some techniques and ways to grow taller that can help you to overcome your problems.

There are different ways to grow taller but first of all we suggest you to focus on some basic points such as nutritious diet, regular exercises that make you fit as well as improve your height and the most important is sufficient rest or relaxation. Include nutritious foods in your daily meal. Foods that are rich in calcium and proteins which helps in body building and increases heights such as milk, eggs, meat and coral calcium etc can be quite effective to increase your height. Regular exercises and yoga are also equally important for you. And the last is proper sleep that relaxes your body and helps you to increase your height.

Now, let’s move on to our main concern, “how to remove grease stain from clothes?” Well for starters, use dishwashing liquid detergent. Put some of it directly to the stain and was your clothes normally. After washing ensure that the stain is completely removed before you dry it. Another way is to create a paste with some water and laundry detergent and directly rub it onto the stain before washing it.

A can of hair spray can also do the trick for you, just spray it onto the stain to remove it and wash the clothes as usual. Follow these simple steps thoroughly and you can be “stain-free” forever.

As we all have realized that it’s really tough to remove dried stains, so it is much better to prevent any types of stain from drying. If you have wine stain on your carpet first apply a hydrogen peroxide and leave it for few minutes then prepare an equal mixture of water and carpet cleaner and spray over the stain. Blot the stain area with a clean cloth until the stain is removed. But make sure you checked the special instruction label for cleaning the carpet.

]]> http://askmesolution.com/2011/08/tips-wine-stain-removal.html/feed 0 http://askmesolution.com/2011/08/furniture-it%e2%80%99s-types.html http://askmesolution.com/2011/08/furniture-it%e2%80%99s-types.html#comments Thu, 18 Aug 2011 23:10:39 +0000 admin http://askmesolution.com/?p=358 Furniture like sectional sofa is household equipment designed for variety of purpose. Furniture can be of wood, metal, plastic, fabric, glass, leather etc. However wood is highly preferred for making the furniture owing to its durability and eye appeal. Furniture can be mainly divided into three types; free standing, built-in and fitted-in, sectional sofa being the example for free standing furniture.

Medium size furniture which can be easily moved or rearranged are free standing furniture some examples can be chairs, table. These types of furniture are not much expensive. Built-in furniture’s are permanently attached and might have no gapping under and beneath the furniture. The costs of this furniture are usually incorporated into initial building cost. For example, book racks, wardrobe, kitchen fittings.

Fitted Furniture is a type of furniture which is designed so as to make use and otherwise separate into components and kept for further use. It saves the space, can be re-arranged and easily moved. For example, closet, shelves, fitted beds.

These types of loans are mainly categorized under short-term loans and charges low interest rates so it’s very easy to get access to these loans. The due date of these types of loans is until next paycheck, but in some circumstances due date can be extended. However, these cases are very rare. The point to be considered is that if you are not able to pay within the due date there is risk of paying more interest to lender along with borrowed money.

Today many lenders have gone online so it is not so hard to find cash advance lender, but you may have some difficulty finding  the reputed one. So before you go for a decision carefully analyze the financial facts and interest rates they are charging. Compare between the lenders then make the final decision which will definitely help you choose the right one like Personal cash advance. It has good financial records, lends you money in very low interest rates with no hassle of unnecessary terms and conditions, so please do visit us once at http://www.personalcashadvance.com.

Try boosting your confident my imagining the end result of your plan, when you will be in your boyfriend’s arm and struggle hard to make it ‘real’. But whatever you do, don’t go on a rampage by harassing him with lots of nasty texts or calls. Limit your contact with your boyfriend and focus on other things. A new hobby could divert your mind from your ex and will regain your confidence. When your ex notices that you have moved on, it will act as a red rag for a bull and you can get boyfriend back eventually.

If you are far away from location where professional cleaner can be contacted, then apply distilled white vinegar which will prevent coffee stains to set in your cloth. You even can buy stain removal spray or treatment product which will help you to remove the stains but be sure about is instruction to use and its consequences.

Services that a hotel offers, may differ depending upon the customers. A traveler searching for five star hotels in London expects the high profile service than a student’s searching for economical hotel. Actually hospitality industry is only a part of tourism industry whereas catering industry is a part of Hospitality industry.

Today tourism industry is growing at a tremendous speed and have becomes world’s top 3 industries next to oil and automobile industries and with the growth in tourism industry the hospitality industry are also expanding as these two industries are mutually dependent.

If you have a rust stain on your clothes, then lemon juice would be a perfect tool, use some on your clothes and wash it normally. Aspirin comes handy while dealing with perspiration stains. Crush it and use with hot water to get rid of the stains and then rinse it with water. Rubbing alcohol can also come helpful while dealing with blood and hard water stains whereas use of detergent not only removes the stains from your cloth, but also insure that it is not discolored.

Try to have a clear image of the beginning of your relationships. Analyze how you got her to like you; what did you do, how funny and confident you were. Women always like the men who can love and take care of them. Take a look at yourself, maybe your confidence has gone since you have been rejected or your smile has been ripped apart by the pain or maybe you’re just too weak by desperately trying to get girlfriend back. How can she take you back if you have turned into something completely different? So, try not to be like this if you want her back.

]]> http://askmesolution.com/2011/08/patch-girlfriend.html/feed 0 http://askmesolution.com/2011/08/naturally-grow-taller.html http://askmesolution.com/2011/08/naturally-grow-taller.html#comments Wed, 10 Aug 2011 18:54:08 +0000 admin http://askmesolution.com/?p=303 Are you thinking how to become taller and how to get that few extra inches to make you look even more attractive? If yes, continue reading to get some ideas about achieving your goal. According to a research data huge population are unsatisfied with the height they have. Mostly teenagers are found concerned with how to become taller in an easy way.

Do these exercises twice a day starting each exercise from 10 times and gradually increasing it. Taking rest is also important to get desired height and it will give your body time to recuperate from all the activities of the day and boosts your body to develop.

Before you figure out how to get rid of acne, I would suggest you to first make sure that the problem you got is an acne problem. Generally if a teenager gets some skin problem, we just predict it as acne. Acne is mainly categorized into two ways types: inflammatory and non-inflammatory. Non inflammatory acne is few white heads and black head on the face and it is comparatively small and can be easily treated. Inflammatory acne is red pimples and bigger white heads which often affect the face, neck, back, chest and groin areas. In some cases, even surgeries are necessary to cure it.

However, we do agree that this may take long time to reduce double chin. And if you have decided to opt for the surgeries, then don’t be so scared. Double chin surgery is a simple process of eradicating fat from your skin which is deposited under your chin. They will just insert a liposuction pipe underneath your chin and pull out the fat inside there. Also, they will cut off your muscle in order to give you a fantastic look. But, these surgery can cost you from $2500 to $5000.

Double chin plastic surgery involves making a small incision on your neck with a microscopic surgical instrument, in order to get that piece of stubborn fat out of your neck. It is so precise and unnoticeable that no one will ever detect the area of incision. Unlike previous methods of dealing with double chin, plastic surgery doesn’t need you to go through those painful processes of recovering for weeks. With plastic surgery, you can even be back to your daily life within few days after the surgery, of course without your “other chin”.

The diet solution for good health
1. Maintain regularity in your routine.
2. Eat as much natural food as you can.
3. Consume seasonal foods as far as possible.
5. Avoid too much sugar, salt.
6. Eat foods which contain carbohydrate, especially starch and fibers.
7. Avoid food that contain large amount of cholesterol and saturated fats.
8. Watch your weight and maintain ideal weight.
9. Avoid eating the same kind of foods all time. Eat a variety of foods.

Make sure that you have plenty of accurate information to share with the folks. At the first go, most of the time a person will be dealing with the idea of selling their structured settlement. Hence, they need direction and concern through the procedure. To get more information, one should be capable of offering them contact details. The toll free phone number will be the best, rather than your e-mail or your address.

Your back is a complex structure that makes up for a substantial portion of your overall height. Hence, the potential height depends upon the health of your back and spinal cords. The vertebrae on spinal cord stop growing after adolescence, so it is essential that you focus on the two other components i.e. the muscles and cartilage, which have the most potential to grow.

When you stretch out your spine your cartilage will to soak up fluid from your system and thicken. This thickening makes you taller. Growing taller secret also depends upon the posture of your body. If you have a poor posture that you are greatly hurting your effort to become taller.

When the breakup happens, at first you should learn to accept the breakup. Give each other some space and wait for things to cool down for some time. Even though this may seem hard, you should follow it strictly.

If you broke up, there must be some reasons behind it. Discover those reasons and learn from your experience to find what you need to change. Forgiveness is another important to move forward in a relationship. Also, continue with your social life and make up your mind to build a plan on how to get back an ex.

Always read the reviews of the previous customers and check their reactions. Also, verify the uptime of the servers and customer support of the company. If they have the server uptime less than 99.40%, move on to the next company. Make sure how much data your site can “eat” per month as most of the “unlimited” data plans are not exactly unlimited.  Now, you should have a pretty narrow list from which you can easily choose the best webhost for your site.

Coffee Stains

Are you thinking how to remove coffee stains? Yes, undoubtedly sometimes the wonderful coffee slips and ruins our favorite dress or table cloth. Here we will talk about how coffee stains can be removed permanently. If we leave it to set, it’s nearly impossible to remove coffee stains from your cloth.

Remember you should not rub the stain because it spreads, instead blot the stain by paper towel. Use cold waters to rinse on back of stain. Make a paste using powdered laundry detergent, distilled white vinegar and cold water, and then apply it on bo

th sides of stain. After leaving it for about 5min rub the “pasted” stain with the help of tooth brush or small nail brush in circular motion.

Wash the stain with cold water and with small amount of detergent in stain rub the stain area. Now wash the cloth as per the direction in the cloth. Repeat the process till the stain is not removed but don’t dry because drying means setting the stains forever.

This would prevent any potential disaster that may occur and also there are some definite measures and very efficient technique that only experts at tampa carpet cleaning company can do to keep you from ruining your carpet. If you have a red stain over your carpet then, you might as well call a expert, as red stains are the hardest stains to remove from the carpet and if you try remove it yourself, then it is likely that you would end up ruining the carpet.

Panic Away is the program which contains relevant information on how you can tackle any situation which may arise in your day-to-day life. It assists you to control the panic attacks before those attacks can take control of you. You can find much positive panic away review online which proves that this technique actually works and you will have total control over your symptoms.

When it comes to Italian kitchens and what you are going to achieve there, it all falls down to correct tools. Although there are many specialty things like pasta makers,which would make your task easier it always pays if you choose to do it by hand. If the recipe to meal use choose is exhaustive and very difficult, it will most likely need you to choose some specific tool to get it right.

These worktops suits both modern and traditional kitchens with range of sizes, shapes, designs and colors. It is a bit softer which soaks up clatter and brings natural sensation to your kitchen. It adds a bit of warmness to the cool white kitchen whilst keeping the diseases out of your kitchen with its natural antibacterial agents. Also, it is quite simple to sustain, just reapply oil when needed and it would be good as new. In brief, wooden worktops are a wholesome package that would make your kitchen look fantastic with natural looks.

Second nature kitchens consists of factory built firm component which are fully color matched with the doors. It supplies you with all the aspect you would look forward to from a modern kitchen. With neat storage options that make sure everything can have its own space and smooth drawers, you would always have a pleasant experience whenever you are in the kitchen. So, ensure that you utilize every inch of your kitchen space and reduce your effort at the same time, with this type of kitchen.

Pile destruction occurs when carpet receives heavy traffic without proper cleaning whereas shading occurs when carpet is brushed in two different directions. These problems can become a major malfunction if not cared properly and you may need to consult carpet cleaning Brandon FL.

Every carpet fades with time. Sunlight, improper cleaning will even speed up this process. But, being little careful in our ways can hold up fading. When the backing becomes wet, browning occurs and is called wicking. You can avoid this by proper cleaning of spills. Mildew is growing of molds in the carpet. Carpet should be kept dry and treated by anti-bacterial to prevent it.

Fortunately, there are many websites on essays uk like Aplusa.org.uk that can help you with the quality essays and assignments as you required. These sites come in handy when you don’t have time to write or you are lack of skills. These sites costs money if you want to buy a essay. They provide you quality works saving your time. Students usually don’t have time to manage all those things. And they may require excellent essays usually when they are out of time with affordable prices.

They have very friendly professional writers available 24/7 to help you. They also provide you  custom research paper writing services which helps you to improve your GPA easily and manage your time as you required. So, if you want realism and privacy with a with a quality essays, then Aplusa.org.uk is the ultimate place for you.

Some of the characteristic you should be looking in a web hosting service is the features it provides for the price that you pay. You may want to avoid free ones, as those hosts will have very limited services like storage, FTP upload volume, Email accounts and security. If you are running an ecommerce website, then would need features like SSl, MySQL, PHP, Perl, FTP, telnet etc. Before you sign up for a web host, check if they offers these services or not. Also, check how much bandwidth and space your website will get in the plan. Make sure your web host can serve you if you need to upgrade in future.

Other important factors are:-

1.Customer Support:
If your website ever need help in some critical situation, then your hosting service must be good enough to respond to you quickly. Trying testing the customer support by calling them at odd hours and see if they can respond to you in real-time.

2.Uptime:
If you want attract audience then your site must have uptime of 99.9%. You can find some hosts offering you a 100% guarantee system uptime. It is quite impracticable to offer this but such host will give you some recompense in case of any downtime.

3.Company Stability:
You cant afford to have unreliable web hosting services for your business. It is always wise to read the web hosting reviews and choose your host carefully.

Code Meaning :
Faulty device drivers, or services from backup utilities or virus scanners
Recommended Resolution:
Remove, disable or stop the offending drivers, backup utilities or anti-virus programs. Get updated software from the manufacturer.

Stop Code: STOP 0x0000001E
KMODE_EXCEPTION_NOT_HANDLED

Code Meaning:
Some driver files may be causing a problem.
Recommended Resolution:
Remove, disable or update the driverfile listed in the error message. Verify if new hardware installation
is correct.

Stop Code: STOP 0×00000024
NTFS_FILE_SYSTEM

Code Meaning:
Usually caused by disk corruption in the NTFS file system or third-party disk defragmenters.

Recommended Resolution:
Use hard disk diagnostic software to verify that the hard disk is working. Remember to always Use
Microsoft-certified disk defragmenters.

Stop Code: STOP 0x0000002E
DATA_BUS_ERROR

Code Meaning:
Caused by a parity error in the system memory. Almost always caused by hardware problems—a configuration issue, defective hardware, or incompatible hardware.

Recommended Resolution:
If physical RAM was recently added to the system, remove it and see if the error still occurs. If the error persists, try disabling memory caching in the BIOS. Else remove, repair or reinstall the defective hardware.

Stop Code: STOP 0×00000050
PAGE_FAULT_IN_NONPAGED_AREA

Code Meaning :
Caused when requested data is not found in memory; the system checks the page file, but the missing data is identified as unable to be written to the page file

Recommended Resolution:
Remove any newly-added hardware or run diagnostic software supplied by the manufacturer to check if
the component has failed. Install updated device drivers or roll back to a previous driver.

Stop Code: STOP 0x0000007F
UNEXPECTED_KERNEL_MODE_TRAP
Code Meaning:
Caused when the CPU generates an error that the kernel does not catch. Usually hardware related—especially RAM. Can also be caused by CPU overclocking, or defective components on the motherboard. Recommended Resolution:
1. Run the memory diagnostic to test RAM.
2. Restore overclocked settings to previous values.
3. Repair/replace the motherboard.
4. Disable sync negotiation in SCSI BIOS; check SCSI termination.

Stop Code: STOP 0x000000D1
DRIVER_IRQL_NOT_LESS_OR_EQUAL
Code Meaning:
Occurs when the system attempts to access pageable memory at a process IRQL that is too high Recommended Resolution:
Very similar to STOP 0xA. Remove, disable or stop the offending drivers, backup utilities or anti-virus programs. Get updated software from the manufacturer.

Stop Code: STOP 0xC000021A

STATUS_SYSTEM_PROCESS_TERMINATED
Code Meaning:
Caused when the user-mode subsystem (Winlogon or CSRSS) is fatally compromised and security cannot be guaranteed. The most common causes are third-party applications or mismatched system files.
Recommended Resolution:
1. Remove, disable, or roll back any newly-installed device driver.
2. Uninstall any newly-installed software.
3. Use Windows-compatible backup/restore programs.
4. Restore full control permissions to the local SECURITY account on the systemroot folder by doing a fresh parallel installation of Windows on a separate partition.

Well, most of us do keep track of activities happening within our websites now days. Whether it is simple count of the visitors or the complex demographic analytics, it always helps to improve the overall experience of your website. Bounce rate is also one of the important factors which will give you blueprint of the general quality of your website. Having a huge amount of traffic is not good enough, if you have a relatively high bounce rate. Main reason for having a high bounce rate is possibly because your website is non-relevant to the query or your website is a complete mess. Keeping a low bounce rate is very important for your website and your business.

Enough about the “problem”, let us now move on to the solution. Can your really “control” users to stay and browse your site? Yes it is possible!

What Is Bounce Rate?

Bounce rate is the percentage of visitors that “bounce” off from your website on arrival. This means people who came to your website left immediately without navigating through your website.

The Solutions:-

Quality Content

Quality content is the most important if you want to keep your visitors from wandering off your website. If a user lands in your page and finds the same content as other website in net, it is likely that he would leave your webpage without even reading the content. So it is very important that you offer your visitors solid, fresh, and relevant content.

Pop-Ups and/or Auto play Sounds

Pop-ups and Auto play music are the most annoying stuff when you visit a website. The first few seconds on your webpage are crucial to keep the visitor in your webpage for longer time. And when you have instant pop-ups and/or auto play sounds to welcome a visitor, it would certainly push a user to leave your website straight away.
Simply, your website should never have any pop-ups or sounds which play automatically when landing on the home page or any other page.

Website Navigation

User-friendly website navigation is must because it helps users navigate easily through your website. What is the point of having loads of information which your users can’t even find easily? So, make sure you have smooth navigation system and users have access to information without having to digging through the entire website.

Loading Time

Visitors rarely tend to stay on a website which loads slowly. If your website has this problem, visitors would most probably leave your site without even bothering to wait for it to load. There is many things you could do to decrease your website’s loading time such as minimizing your JavaScript code, converting to a clean CSS design, optimizing your images etc.

If you happen to choose this method for your carpet, the qualified personnel at carpet cleaning tampa will have a solution of small, soft granules with a extremely low portion of water, detergent and solvent, applied deep into your carpet with rotating brush. The dust particles on your carpet would be thus absorbed by the solution and when the brushing occurs, it will almost remove all these elements from the carpet. Finally, a vacuum is used on the carpet to remove the residual, leaving it essentially dry straight away.

However, if you think to clean your carpet yourself by hiring necessary equipment it may be an economical idea but hiring a Tampa carpet cleaning company would be more that guarantees clean as a brand new one. The cleaning agents they use will not affect your health as well as protects carpets from stains, spill and wear & tear. Thus, your carpet would have a longer life span and indirectly helps you to save your money.

When you apply for a payday loans, apply for the loans that doesn’t require the use of fax machines because these kinds of loans usually require you to send your personal information and other documents to the lender. This would be a little more time consuming and you wouldn’t want that. So, its better if you apply for the payday loans no faxing.

The faxless loans are quite popular and hassle free. You will get instant payday loans to quickly resolve your crisis and get back to your work quickly. You will get the loan amount within the couple of hours of verification and this would prove crucial if you have busy daily schedule. If you apply for the loan in the morning you can get the loan by the night. You never know when an emergency comes across your way and payday loans would be a great idea for your needs.

• If the error comes up very briefly, before you can note it down, and the system restarts, you will need to change a setting to tell Windows not to automatically reboot. Right-click My Computer, select the Advanced tab, and click “Startup and Recovery”, in Windows 2000, clear the “Automatically Reboot” checkbox. In Windows XP, click Settings and clear the “Automatic Restart” checkbox. This, of course, assumes that Windows has rebooted normally and you are able to change the setting.

• If you are not able to boot normally, restart Windows and press [F8] repeatedly during the POST cycle. This will take you to the Advanced Options menu. Choose Safe Mode. Windows will attempt to load with a minimum set of drivers. If Windows is able to boot into Safe Mode, this most likely means that the problem is with a particular software, and is not hardware-related. If Windows is not able to boot into Safe Mode, restart the computer, bring up the Advanced Options screen (by pressing [F8] during POST) and select “Last Known Good Configuration”. Windows will then attempt to load the last settings where everything worked normally. If that doesn’t work, then it most likely means you have a serious hardware or critical startup system file error. If this error has occurred after any recent hardware additions, remove the hardware and try to boot again.

• If you are able to boot into Safe Mode, first perform a virus and spyware scan using a tool such as Norton AntiVirus and Spybot S&D. Uninstall any recently added software, and remove or roll back any
  updated device drivers. (To roll back device drivers, go to the Properties page of the device in Device Manager, select the Driver tab, and click Roll Back Driver). In XP, you can perform one additional step—running System Restore, as explained above for Windows ME.

• Restart the computer normally and check if the problem recurs. If it is an intermittent problem, and occurs at random, you can note down the error number the next time it occurs, since you disabled
  Automatic Restart after a crash. Boot into Safe Mode and see if you get the same random error. If you do, then the problem is likely hardware-related. Resolve the issue by following the hardware troubleshooting steps explained below. If the error only occurs in normal mode, then it is likely a software problem. Follow the steps for software and device driver troubleshooting described below.

• Look in Device Manager and troubleshoot any hardware device conflicts as explained in the troubleshooting Hardware Device Conflicts in Windows section. You can remove or disable the device, or roll back its driver to a previous version.

• If the BSOD is caused by a faulty program that crashes Windows at system startup, you can disable the software from starting up by using msconfig.exe. Type Start > Run, type in “msconfig” and press
  [Enter]. Select the Startup tab and disable any or all software you think may be the ones causing the problem. Better still, you could disable all the software in the list, enable them one at a time, and
  reboot the computer to identify the offending software.

• If the BSOD is caused by faulty hardware, remove any recently added hardware—after switching off the PC, of course! If the BSOD still occurs, or there are no newly added hardware, test the RAM for errors by using a memory diagnostic program such as Windows Memory Diagnostic (http://oca.microsoft.com/en/windiag.asp). If the diagnostic reports errors, then you’ve found the culprit. Replace the defective RAM.

• If the BSOD is due to corrupt system startup files, you can repair Windows by performing a Repair nstall. Boot the PC from the Windows installation CD, press [Enter] to set up Windows XP, press
  [F8] to accept the license agreement, and then press [R] to start the Repair Installation. Windows will reinstall all the system files and redetect all the hardware.
  Note: You will have to visit the Windows Update site to reinstall any patches and Service Packs, since the repair installation will remove them.

• If you are still getting BSODs, switch off the PC, open the cabinet and remove all but the essential hardware: the mouse, keyboard, hard disk, CD-ROM, display card and RAM, along with the PSU and processor of course! Now, first attempt booting into Safe Mode, and if that works, reboot normally. If you are successful, the problem is with one of the peripheral devices. Add all the peripherals back one by one till you get a BSOD again—the last added peripheral is the culprit.

• If you are getting BSODs during installation, then the problem could be with the RAM, hard disk, processor, or one of the peripherals. Test the RAM using a memory diagnostic tool as described above, check the hard disk for errors (most hard disk manufacturers provide software utilities that can diagnose
  errors), verify that the CPU is not overheating by following the instructions in the Motherboard section of this guide, and remove all peripherals and run the installation with the minimum configuration as described above. If the installation is successful, you can troubleshoot the rest of the hardware devices
  from within Windows.

Problems causing the BSOD
The BSOD is the main way for virtual device drivers to report a problem. The error description will state that Windows faced a problem (exception) at a particular memory address (a portion of the RAM) in a certain file, usually with the prefix VxD (virtual device driver), or the file name may have the DLL xtension. At the minimum, it indicates that there was a problem with that particular file. Typically, this ay have been caused by some action of the user that Windows does not allow—like accessing a ocument from a floppy and then removing the floppy before closing document. In other cases it may ndicate that there is a problem with a particular software or hardware. If the BSOD repeats with the same message, then there is potentially something seriously wrong, and you should investigate further.

Cause:

This is most likely a problem with the hardware; it may also be caused by rogue software or problems with system services.

Solution:

Note down the stop message error code and the friendly name. Refer to the Troubleshooting BSODs section for general principles on how to troubleshoot the problem. Troubleshoot problems with Windows system services .

Cause:

This is a known issue in older XP releases, and can be patched by upgrading to Service Pack 1. Also, some software drivers “lock” during the shutdown process, preventing Windows XP from shutting down completely.

Solution:

Upgrade your system to at least Service Pack 1. Update the device drivers. If the problem persists, uninstall problematic devices through Device Manager and all their associated software, and restart the computer. Windows XP will auto-detect the hardware and ask you to provide the location for the software drivers. Specify the location of the new drivers and let Windows complete the installation. Some devices may require a firmware update. See the Updating the BIOS section of this guide to understand the general principles on how it is done. Refer to the manufacturer’s Web site for details on the exact steps to be followed.

Cause:

Windows XP, by default, is configured to restart in case of an error. This behavior may occur if an error is generated during the shutdown process. It could be either hardware or a software problem.

Solution:

Disable Automatic Restart. Right-click My Computer. Select Properties > Advanced > Settings > Startup and Recovery. Clear the “Automatically Restart” checkbox. Shut down the computer and see if you get an error message or a BSOD. Follow the troubleshooting steps explained earlier in the BSOD section of this guide. If there is no error message or BSOD, check your hardware.

Some of the most common culprits are CD-Writing software suites (Roxio, Nero, etc.), some specialty keyboards such as Internet keyboards, USB devices, and power management settings. Check the drivers for all the hardware devices and update them if possible. Unplug the hardware devices one by one and go through the shutdown process to isolate the device. Check the power management settings and switch to the “Always On” option. Troubleshoot problems with Windows system services as explained earlier in this chapter.

Tip
Disabling the wrong service will cause further problems so be sure of the service you wish to disable. If you wish to reenable a service from Recovery Console type “enable <servicename_ type>”. Here, servicename_ type should be the same type that was showed on your screen when you shut down the service.

.

Cause:

Windows is waiting for all running programs and services to stop before shutting down.

Solution:
In XP, many programs (including Windows itself) install services that run in the background, waiting for some action from the user. Some of these may take a long time to shut themselves down after receiving the Shutdown command from Windows. Identifying the service or services causing this problem will mostly be a trial and error process. If you have installed some software recently it might have a service that is slow in exiting and is delaying the shutdown process. To find out the list of services that are running on your system, click Start > Run, type in “services.msc” and click OK. This launches the Services Manager. Look through the list and identify any
services related to software you have recently installed.

Stop the services one at a time and shut down the system till you identify the offending service. Restart all the other services and shutdown again just to make doubly sure you’ve stopped the right service. Note: Ensure that you don’t stop any Windows systems services and other essential services. Stopping critical and essential services will cause more problems. Also, you should be aware that if you stop a service related to any software you have installed, that particular software may not function correctly or not function at all. Check the vendor’s Web site for more details on the issue and any updates to correct it.

1. Start the system configuration tool by going to Start > Run, typing in “msconfig”, and pressing [Enter]
2. Click Selective Startup and clear the following checkboxes: “Process System.ini File”, “Process Win.ini File”, and “LoadStartup Items”.
3. Select the Services tab and click the “Hide All Microsoft Services” checkbox, and then select “Disable All”.
4. Click OK and then “Restart” to restart your system.
5. When Windows restarts, if the error doesn’t occur, re-open “msconfig” and check the “Process System.ini File” checkbox,click OK and restart your computer. If the error returns, you know that the problem is with one of the System.ini entries. If the error doesn’t occur, progressively enable the remaining checkboxes (“Process Win.ini File”, “Load Startup Items”, and “Load System Services”). Restart the computer after you enable each checkbox till the error occurs again.
6. Once you have identified the area in which the error occurs, disable the entry or stop/disable the service as the case may be.

Solution 1b:If you are unable to perform a clean boot to troubleshootthe problem and you know the name of the service,then start the Recovery Console as explained earlier. From thecommand prompt, change to the System32 folder. Type in “listsvc” at the command prompt in the System32 folder. A list of all services on your computer will be displayed. Locate the service name that is causing the error. Type “disable ” and press [Enter].
The computer will print a message listing the “start type” that is being shut down. Note it down in case you need to re-enable the service. Type “exit” and allow the computer to restart normally.

Solution 1c: If you recently installed a program that is causing this error, remove the program. If the program is not listed in the Add/Remove list, you’ll have to visit the developer’s Web site for instructions on how to remove the program.
Problem: After an upgrade, programs that loaded during startup do not start.
Cause: This symptom is noticed when you log in for the first time after upgrading from Windows 98 or ME. Windows XP will remove all programs from the startup list, which it ‘feels’ are not compatible.
Solution: Click Start > Run, type in “msconfig” and press [Enter]. Click the Startup tab. Select the “Restore Startup Programs” option and click OK. Restart the computer. (This option won’t be available if Windows XP Setup did not disable any startup programs.)

Solution 1c: If System Restore doesn’t get your computer to start normally, get to the Windows Advanced Options menu and select “Last Known Good Configuration (your most recent settings that worked)”. Windows XP will start the computer using the Registry information from the last shutdown.

Solution 1d: If the Last Known Good Configuration does not work, then your final course of action is to do an in-place upgrade. Run the Windows XP Setup program from your installation CD. Refer to the Upgrading Windows XP from Windows 98 section of this guide. The steps are similar.

Solution 1e:If you suspect that a recently installed system service is causing this problem, stop the service by following the steps outlined earlier.

Cause 2: The BIOS settings are incorrect.
Solution 2: Restart the computer and enter the BIOS setup screen. If you have changed any settings, restore them to the previous values. If you are not sure about the previous values or haven’t changed the settings, select the Load Fail-safe Defaults (this could also be “Factory Defaults”, “BIOS Setup Defaults”, etc.) option and
reboot.

Cause 3:There might be a hard disk failure or data corruption in the boot records
Solution 3: Insert the Windows XP installation CD and restart the computer. On the “Welcome to Setup” screen, press [R] to start the Recovery Console. You will be prompted for the administrator password. Type in the password, or if the password is blank, hit [Enter]. At the command prompt, type in “chkdsk”. This will run the Checkdisk utility that will scan the hard disk for any faults. Checkdisk may report a hardware failure or errors on your disk. If it does, it is best to take your PC to a repair professional.

Problem: Your screen remains blank when you switch on the PC.

Cause: That you are not able to even get the BIOS POST screen indicates a problem with basic hardware.
Solution: Look at the other sections in this guide. Work through the PSU, video card, and motherboard troubleshooting sections before checking the other components.

Problem: After the POST screen, the system hangs.

Cause: Again, more hardware related problems. This time the culprit could be the video card.
Solution: Work through the video card troubleshooting section before checking the other components.

Problem: Your XP computer stops responding at startup.

Cause 1: A device driver or a recently installed software or service is stopping Windows from booting up normally. There has been a corruption in the Windows registry.
Solution 1a: Restart the computer and log into XP in Safe Mode. Open Device Manager and look for any problematic devices. Ensure that any jumper settings on the hardware are properly set. If the hardware is properly configured and you are still facing the problem, then it may mean that the device driver for the hardware needs to be updated. Remove the device through Device Manager and reboot normally. Obtain the updated device drivers for the hardware (through the Internet, a CD, etc.). Run the Add Hardware Wizard and reinstall the device drivers.

Continued…

The finest Chicago Furniture Store with 120,000 square foot furniture warehouse, Interior Express Outlet gives ultimate satisfaction for your furniture needs. Their products range from chairs and beds to home theatre seating and entertainment centre. They offer huge discounts on floor models and overstocked items with clearance section that change daily. So, be sure to check their weekly sale and clearance section to grab a great deal before anyone does.

• The hardware does not have the requisite software drivers, andWindows is not able to determine the device type
• The driver is not compatible with the OS and hence it is not ableto inform Windows about the hardware. This is common if aWindows 9x/ME driver is installed on Windows 2000/XP.
• Each hardware component should normally communicate a basic device ID to Windows. If the hardware does not have this device ID or Windows does not recognise the device ID of the hardware, then the device is listed as unknown.

SOLUTION

• First, boot the computer into Safe Mode. If the device is nolonger listed in Device Manager, then most likely it was a virtualdevice driver.
• Next, check the programs loaded at systemstartup (Start > Programs > Startup). By trial and error, disableeach program till you identify the software that is causing thedevice to be unknown. Uninstall and reinstall the software.
• Ifthese steps do not work, or if you suspect that the problem ishardware-related, remove hardware devices from your computer one at a time until Device Manager no longer lists theunknown device. Or, if you know what hardware is causing theerror, verify that the hardware is working and that you have all the correct and updated drivers for the OS. Install the driversthrough the Add Hardware Wizard.

Code Meaning: The device is only partially configured and Windows could not find all the resources required by this device.

Code 17

Code Meaning: (Not applicable to Windows XP) The hardware is a multi-function device whose driver file is reporting invalid information on how to split the resources.

Recommended Resolution: Remove the device from Device Manager and reinstall it using the Add Hardware Wizard. Use an updated device driver if required.

Code 18

Code Meaning: The drivers for this device should be reinstalled.

Code 19

Code Meaning: A problem with the Windows Registry entry for this device was detected.

Code 20

Code Meaning: (Not applicable to Windows XP) One of the drivers for this device could not be loaded, and Windows is not able to interpret the result.

Code Meaning: (Not applicable to Windows XP) Windows stopped responding when it tried to start the device, and hence will never try to start this device again.

Recommended Resolution: Run the Update Driver Wizard and reinstall with an updated driver from the manufacturer.

Code 12

Code Meaning: Two devices have been assigned the same I/O port, interrupt or DMA channel. This could be by the BIOS, by Windows, or both. Also, it could be that the BIOS has not allocated enough resources for the device.

Recommended Resolution: Disable one of the devices. (Windows 9x/ME: Double-click, select “Disable in this hardware profile” on the General tab of the property sheet; Windows 2000/XP: Rightclick and select Disable)

OR
Check the Resources tab to get details of the conflict. Refer to the hardware documentation and/or the manufacturer’s Web site for instructions on the correct values that need to be set manually. Clear the “Automatic Settings” checkbox, click the “Change Setting” button, and input the values.

AND/OR

Reconfigure the BIOS resource allocation if possible. Refer to the motherboard documentation along with the device documentation.

Code 13

Code Meaning: (Not applicable to Windows XP) Windows did not detect the hardware.

Recommended Resolution: Verify that the hardware is working and that the physical installation is correct. Refer to the manufacturer’s documentation for specific installation instructions.

AND

Remove the device from Device Manager and reinstall it using the Add Hardware Wizard.

Code 14

Code Meaning: The device cannot work properly until the system is restarted.

Recommended Resolution: Restart the computer.

Code 15

Code Meaning: (Not applicable to Windows XP) The device is causing a resource conflict.

Recommended Resolution: Run msinfo32.exe to get more information on the conflict. Check the Resources tab to get details of the conflict. Refer to the hardware documentation and/or the manufacturer’s Web site for instructions on the correct values that need to be set manually. Clear the “Automatic Settings” checkbox, click the “Change Settings” button, and input the values.

Code Meaning: (Not applicable to Windows XP) Another device is using a resource that this device needs.

Recommended Resolution: Run msinfo32.exe to get more information on the conflict. Check the Resources tab to get details of the conflict. Refer to the hardware documentation and/or the manufacturer’s Web site for instructions on the correct values that need to be set manually. Clear the Automatic Settings checkbox, click the Change Setting button and input the values.

OR
Run the Update Driver Wizard and reinstall the driver or get an updated driver from the manufacturer.

AND/OR
Remove the device from Device Manager and reinstall it using Add Hardware Wizard.

Code 7

Code Meaning: (Not applicable to Windows XP) The drivers need to be reinstalled.

Recommended Resolution: Run the Update Driver Wizard and reinstall the driver or get an updated driver from the manufacturer. 

AND/OR
Remove the device from Device Manager and reinstall it using the Add Hardware Wizard.

Code 8

Code Meaning: (Not applicable to Windows XP) Windows cannot load the basic device loader file that loads the device driver, or it is missing or corrupt, or a software value for the device is missing or corrupt.

Recommended Resolution: Run the Update Driver Wizard and reinstall the driver or get an updated driver from the manufacturer.

AND/OR

Remove the device from Device Manager and reinstall it using the Add Hardware Wizard.

Code 9

Code Meaning: (Not applicable to Windows XP) The BIOS is reporting the resources for this device incorrectly and the Windows Registry is invalid.

Code 1
Code Meaning: The device is not configured correctly.

Recommended Resolution: The software drivers for the device have been incorrectly installed or incorrectly configured. Select the Driver tab and click the Update Driver button. This will launch an update Wizard. Follow the instructions and locate the correct driver for the device to install it.

Additionally, you could try removing the device from Device Manager and reinstalling it using the Add Hardware Wizard. Verify from the hardware documentation/manufacturer’s Web site that the device will work with your OS.

Code 2
Code Meaning: (Not applicable to Windows XP) Depending on the type of device, this could indicate either a problem with the BIOS or a problem with loading the device driver.

Recommended Resolution: Check with the BIOS manufacturer for an updated BIOS. See the BIOS section of this guide on how to update the BIOS.

OR
Get an updated driver for the device from the manufacturer and update the device software by clicking Update Driver on the Driver tab.

AND/OR
Remove the device from Device Manager and reinstall it using the Add Hardware Wizard.

Code 3
Code Meaning: The driver is corrupt or your system is running low on memory and other resources.

Recommended Resolution: Run the Update Driver Wizard and reinstall the driver or get an updated driver from the manufacturer.

AND/OR
Close any applications using memory.

AND/OR
Add more RAM. See the chapter on Memory on how to do that.

AND/OR
Remove the device from Device Manager and reinstall it using the Add Hardware Wizard.

Code 4
Code Meaning: (Not applicable to Windows XP) One of the drivers for the device may have been corrupted, or its Windows Registry entry may be damaged.

Recommended Resolution: Check the registry by running scanregw. exe. Click Start > Run. Type scanregw.exe and hit [Enter]. This program will check the Registry for corruption and prompt you to restore a previous good version of the Registry if it encounters any damaged entries.

AND
Remove the device from Device Manager and reinstall it using Add Hardware Wizard.

Code 5
Code Meaning: (Not applicable to Windows XP) The device has requested a resource that Windows doesn’t know how to handle.

Recommended Resolution: Run the Update Driver Wizard and reinstall the driver or get an updated driver from the manufacturer.

OR
Remove the device from Device Manager and reinstall it using the Add Hardware Wizard.

Device Manager will list all the hardware in the PC in a tree structure. You can view devices by device-type or by connectiontype. In either view, Device Manager will list the devices causing problems. The problem devices will be listed with any of the following symbols:

• A black exclamation mark (!) in a yellow circle means that the device has a problem. Note: A problem-state device could still be working.
• A red “X” means the device is disabled. That is, it is physically present in the computer and is consuming resources, but does not have a driver loaded.
• A blue “i” on a white circle means that the device’s “Use Automatic Settings” feature is not selected for the device, and that the resources were manually allocated, usually for non-Plug and Play devices. Note: This does not mean that the device is in a problem or disabled state.
• A green question mark (?) in Device Manager means that a compatible (and not the actual) driver for this device is installed,which makes it possible that all the functionality may not b available. Note: This applies only to Windows ME.
• A yellow question mark (?) with “Unknown Device” means that Windows has not recognised the device.

1. Click on the Add New Hardware (Windows 9x/ME) / Add Hardware (Windows 2000/XP) in the Control Panel. The Add Hardware Wizard will start up. Click Next.

2. If you have Windows 9x/ME go to Step 3, else go to Step 5.

3. In Windows 9x/ME, the Wizard will inform you that it is going to search for new hardware. Allow it to do so by clicking Next twice. After Windows finishes searching for Plug and Play Devices it will report that no Plug and Play devices are found.

4. Click Next. The first option tells Windows to search for non-Plug and Play devices. If it successfully detects the device, follow the on-screen instructions to complete the installation. Otherwise, select “No, I want to select the hardware from a list” and click Next. Go to Step 6.

5. In Windows 2000/XP, select “Add a new hardware device” and click Next. In the next dialog box, you can either ask Windows to search for a driver, or you can install the device manually. For manual device installation, select “Install the hardware that I manually select from a list (Advanced)”.

6. Select the hardware type from the list and click Next.

7. If you know the name of the device manufacturer, select the name of the manufacturer and browse through the list on the right side to see if your device model number is listed or a generic name for your model series e.g. HP DeskJet for DeskJet printers. If you do not know the name of the manufacturer or the device model number, check if there are standard device types that you can install. If there are no standard types that can be installed, you will need to find a suitable driver by searching the Internet or getting it from other sources.

8. If the device has a standard type, choose the specification closest matching to your device. If the device does not have a standard type, click the “Have Disk…” button and provide the location for the appropriate driver installation file. Follow the on-screen instructions to complete the installation.

The above steps (for both Plug and Play and non-Plug and Play devices) should normally solve the device conflict and get your hardware operational. However, if you still face problems with the device see the section Using Device Manager for further troubleshooting.

1. Windows will already have the required software device drivers and configure the system with or without user prompts

2. Windows will prompt the user for the OS installation CDs to retrieve the required drivers

3. Windows will prompt the user to provide the location for the required drivers supplied by the device manufacturer.

This would be your cue to insert the manufacturer’s CD that came with the device and point Windows to the correct driver installation file for the OS. Alternately, the manufacturer’s installation guide may provide a different method for installation.

Example: most USB devices require that you install the software first before connecting the device.

If Windows recognizes the device but you don’t have the manufacturer’s
CD, there is a good chance that you can enable basic
functionality by using the default Windows drivers. See the section
Installation of non-Plug and Play Devices on how to tell Windows to use
the default Windows drivers. ]]> http://askmesolution.com/2008/11/installation-of-plug-and-play-devices-2.html/feed 0 http://askmesolution.com/2008/11/resolving-conflicts-2.html http://askmesolution.com/2008/11/resolving-conflicts-2.html#comments Thu, 06 Nov 2008 19:32:00 +0000 admin http://askmesolution.wordpress.com/2008/11/06/resolving-conflicts-2 With thousands of devices that work with Windows operating systems, it is practically impossible to describe all scenario specific solutions. What remains is to describe a strategy that will help you identify and resolve the problem.

The first step is to determine that the problem is really a hardware conflict at the OS level and not something caused by an incorrect physical installation. If you are able to normally boot into the OS, this would probably mean that the physical installation is fine. However, you cannot be certain at this stage. Try accessing the device. If the system hangs, crashes or starts acting weird, then it is pretty safe to assume that the physical installation is fine and the problem is because of the operating system’s interaction with the device. However, just to be on the safe side, power off and inspect the device for proper installation.

If everything seems correct, verify that you have followed the installation procedure as described in the manufacturer’s manual, have all the required software driver CDs and/or floppies on hand and switch the PC on.

If the device drivers are already installed and you are facing system instability when accessing or using the device, go to the Using the Device Manager section.

• There could be a resource allocation (IRQ/memory address) conflict. Two devices are allocated the same IRQ/memory address space.Usually, non-Plug and Play devices would give this problem. Since Windows is unable to detect these devices it may not allocate the resources properly and hence cause conflicts with an existing device.

Note: Some devices, such as PCI devices, can share a single IRQ without conflicts in Windows 2000/XP.

• The software device drivers may not be compatible with the operating system, or may have been corrupted, or may not have been installed. If you have recently upgraded from Windows 95/98, this would usually be the problem.
• A new software program installed is trying to use system resources allocated to other hardware devices or software programs.

• The operating system may freeze frequently
• The new device may suffer performance problems
• An existing device that is conflicting with the new device may suffer performance problems
• Windows starts in Safe Mode
• The system crashes and you get a BSOD (Blue Screen of Death)
• The sound card stops working or stutters
• The screen jumps and shows garbled images
• The mouse stops working
• Modem/network card doesn’t respond
• CD/DVD drive doesn’t respond or crashes the system

Each device installed will have one or more software device drivers that enable the operating system to access and use the device. The software could be provided either by Microsoft itself that will enable basic functionality, or by the device vendor who knows more about the specific model and hence will be able to provide a more tightly integrated device driver.

Normally, Windows Plug and Play will automatically detect the newly-added hardware, determine the system resources required and assign them properly. Plug and Play will also search for the required software drivers and install them transparently. If Plug and Play cannot find the required drivers, it will prompt the user to provide them by inserting the CD/floppy provided by the device manufacturer. Additionally, it will also reconfigure the system resources if required, for example when the newly added device requires some resources already in use.

In case of RAM module problems, you will usually be alerted by beeps from the BIOS. Strip the PC down to the ‘barebones’, that is, just the power supply, motherboard (with CPU & heat sink), minimum RAM and display card. Switch the RAM module to another slot. Verify that the RAM modules are as per the specs defined by motherboard manufacturer. Use matched RAM modules from the same manufacturer. Try a different RAM. If everything is working you should boot up and see the message ‘No boot device’ or something similar. Power off, connect the hard disk and reboot. If the problem still occurs, this points to something wrong with the hard disk or the basic boot up of the operating system. Check the storage section and the Windows troubleshooting section of this site.

If the OS boots normally, then power off and start adding each add-on card one by one, powering up after adding each card until you isolate the culprit. Check the relevant sections for troubleshooting hints for those components.

2. It may be a BIOS problem.
Check the BIOS section in this site.

2. The CPU may not be seated correctly.

This problem should only be relevant if you have installed a new motherboard or upgraded the CPU.

Visually inspect to check if the socket CPU is sitting flat in the socket, which means that the heat sink should be perfectly parallel to the motherboard. With a new socket CPU the heat sink may completely cover the CPU and you will have to remove the heat sink to check. Check for any crushed or bent legs. If the CPU’s socket locking arm was not raised up all the way up before seating the CPU or if it was not lowered all the way down after seating it, the CPU won’t sit properly. If the CPU doesn’t sit properly after this, then either the socket is faulty, or you have the wrong CPU for the motherboard!

It’s pretty difficult to tell by visual inspection if slot CPUs are seated properly. When in doubt, reseat the CPU, which is fairly easy since the heat sink and the CPU are an integrated unit. Also, make sure that you correctly identify release levers located on the top of the slot CPU package.

The PC freezes or reboots suddenly

1. No power from the wall socket: Use a live power outlet. In rare cases, the power cable may be defective and may require replacement.Check the power cable on another working PC. Plug in a lamp or any other electric device to see if you have a live outlet.

If you are used to troubleshooting, you are most likely following
something similar in your head already. Once you begin to think in
terms of the various sub-systems, the chances of you not finding
your problem are very low. Over time, and with experience, you
would be doing this naturally and automatically. Of course on
paper it looks terribly boring and to tell you the truth, it is! But, it
is a good strategy to use a methodical approach in troubleshooting
rather than dive straight in, start poking around, pressing keys and
buttons blindly and then regretting it later.

After trying everything and you are at your wits end with no
solution in sight, it is time to take a step back and forget about
it for a while—attack the problem after some time with a fresh
mind.

When working with PCs day-in and day-out, a problem is
bound to crop up. This site will give you an insight into many of the common problems users face, and
provide suggestions in solving the problem or at the very least
point you in the right direction.

In this site we cover basic to intermediate-level hardware and
software troubleshooting. We assume you’re running Windows..

Don’t Be Careless

When working with hardware, the first thing is to ground yourself
properly. Whenever you are tinkering under the hood, have an antistatic
wrist strap hooked up. If you don’t have one, stop what you
are doing and go buy one now! Never, ever, work without protecting
your delicate electronic components from static. A tiny shot of
static can fry your CPU, RAM and even the motherboard.

Computer components have highly complex and delicate electronics.
When working with an exposed and live motherboard
don’t try to take shortcuts, keep the area clear of other electricity
conductors, an accidental short can just as well fry your PC components.
The same goes for leaving components lying around on
the floor, or on the edge of the shelf—you could accidentally step
on or drop them. Also take care to not drop things onto the motherboard,
bend any components or touch anything you shouldn’t.
]]> http://askmesolution.com/2008/11/the-basics.html/feed 0 http://askmesolution.com/2008/01/disclosure-policy.html http://askmesolution.com/2008/01/disclosure-policy.html#comments Sat, 26 Jan 2008 07:06:00 +0000 admin http://askmesolution.wordpress.com/2008/01/26/disclosure-policy This policy is valid from 26 November 2009

This blog is a personal blog written and edited by me. For questions about this blog, please contact admin@askmesolution.com.

This blog accepts forms of cash advertising, sponsorship, paid insertions or other forms of compensation.

This blog abides by word of mouth marketing standards. We believe in honesty of relationship, opinion and identity. The compensation received may influence the advertising content, topics or posts made in this blog. That content, advertising space or post will be clearly identified as paid or sponsored content.

The owner(s) of this blog is compensated to provide opinion on products, services, websites and various other topics. Even though the owner(s) of this blog receives compensation for our posts or advertisements, we always give our honest opinions, findings, beliefs, or experiences on those topics or products. The views and opinions expressed on this blog are purely the bloggers’ own. Any product claim, statistic, quote or other representation about a product or service should be verified with the manufacturer, provider or party in question.

This blog does not contain any content which might present a conflict of interest

Device Manager will list all the hardware in the PC in a tree structure. You can view devices by device-type or by connectiontype. In either view, Device Manager will list the devices causing problems. The problem devices will be listed with any of the following symbols:

• A black exclamation mark (!) in a yellow circle means that the device has a problem. Note: A problem-state device could still be working.
• A red “X” means the device is disabled. That is, it is physically present in the computer and is consuming resources, but does not have a driver loaded.
• A blue “i” on a white circle means that the device’s “Use Automatic Settings” feature is not selected for the device, and that the resources were manually allocated, usually for non-Plug and Play devices. Note: This does not mean that the device is in a problem or disabled state.
• A green question mark (?) in Device Manager means that a compatible (and not the actual) driver for this device is installed,which makes it possible that all the functionality may not b available. Note: This applies only to Windows ME.
• A yellow question mark (?) with “Unknown Device” means that Windows has not recognised the device.

1. Click on the Add New Hardware (Windows 9x/ME) / Add Hardware (Windows 2000/XP) in the Control Panel. The Add Hardware Wizard will start up. Click Next.

2. If you have Windows 9x/ME go to Step 3, else go to Step 5.

3. In Windows 9x/ME, the Wizard will inform you that it is going to search for new hardware. Allow it to do so by clicking Next twice. After Windows finishes searching for Plug and Play Devices it will report that no Plug and Play devices are found.

4. Click Next. The first option tells Windows to search for non-Plug and Play devices. If it successfully detects the device, follow the on-screen instructions to complete the installation. Otherwise, select “No, I want to select the hardware from a list” and click Next. Go to Step 6.

5. In Windows 2000/XP, select “Add a new hardware device” and click Next. In the next dialog box, you can either ask Windows to search for a driver, or you can install the device manually. For manual device installation, select “Install the hardware that I manually select from a list (Advanced)”.

6. Select the hardware type from the list and click Next.

7. If you know the name of the device manufacturer, select the name of the manufacturer and browse through the list on the right side to see if your device model number is listed or a generic name for your model series e.g. HP DeskJet for DeskJet printers. If you do not know the name of the manufacturer or the device model number, check if there are standard device types that you can install. If there are no standard types that can be installed, you will need to find a suitable driver by searching the Internet or getting it from other sources.

8. If the device has a standard type, choose the specification closest matching to your device. If the device does not have a standard type, click the “Have Disk…” button and provide the location for the appropriate driver installation file. Follow the on-screen instructions to complete the installation.

The above steps (for both Plug and Play and non-Plug and Play devices) should normally solve the device conflict and get your hardware operational. However, if you still face problems with the device see the section Using Device Manager for further troubleshooting.

1. Windows will already have the required software device drivers and configure the system with or without user prompts

2. Windows will prompt the user for the OS installation CDs to retrieve the required drivers

3. Windows will prompt the user to provide the location for the required drivers supplied by the device manufacturer.

This would be your cue to insert the manufacturer’s CD that came with the device and point Windows to the correct driver installation file for the OS. Alternately, the manufacturer’s installation guide may provide a different method for installation.

Example: most USB devices require that you install the software first before connecting the device.

If Windows recognizes the device but you don’t have the manufacturer’s
CD, there is a good chance that you can enable basic
functionality by using the default Windows drivers. See the section
Installation of non-Plug and Play Devices on how to tell Windows to use
the default Windows drivers. ]]> http://askmesolution.com/2007/11/installation-of-plug-and-play-devices.html/feed 0 http://askmesolution.com/2007/11/resolving-conflicts.html http://askmesolution.com/2007/11/resolving-conflicts.html#comments Tue, 06 Nov 2007 19:32:00 +0000 admin http://askmesolution.wordpress.com/2007/11/06/resolving-conflicts With thousands of devices that work with Windows operating systems, it is practically impossible to describe all scenario specific solutions. What remains is to describe a strategy that will help you identify and resolve the problem.

The first step is to determine that the problem is really a hardware conflict at the OS level and not something caused by an incorrect physical installation. If you are able to normally boot into the OS, this would probably mean that the physical installation is fine. However, you cannot be certain at this stage. Try accessing the device. If the system hangs, crashes or starts acting weird, then it is pretty safe to assume that the physical installation is fine and the problem is because of the operating system’s interaction with the device. However, just to be on the safe side, power off and inspect the device for proper installation.

If everything seems correct, verify that you have followed the installation procedure as described in the manufacturer’s manual, have all the required software driver CDs and/or floppies on hand and switch the PC on.

If the device drivers are already installed and you are facing system instability when accessing or using the device, go to the Using the Device Manager section.

• There could be a resource allocation (IRQ/memory address) conflict. Two devices are allocated the same IRQ/memory address space.Usually, non-Plug and Play devices would give this problem. Since Windows is unable to detect these devices it may not allocate the resources properly and hence cause conflicts with an existing device.

Note: Some devices, such as PCI devices, can share a single IRQ without conflicts in Windows 2000/XP.

• The software device drivers may not be compatible with the operating system, or may have been corrupted, or may not have been installed. If you have recently upgraded from Windows 95/98, this would usually be the problem.
• A new software program installed is trying to use system resources allocated to other hardware devices or software programs.

• The operating system may freeze frequently
• The new device may suffer performance problems
• An existing device that is conflicting with the new device may suffer performance problems
• Windows starts in Safe Mode
• The system crashes and you get a BSOD (Blue Screen of Death)
• The sound card stops working or stutters
• The screen jumps and shows garbled images
• The mouse stops working
• Modem/network card doesn’t respond
• CD/DVD drive doesn’t respond or crashes the system

Each device installed will have one or more software device drivers that enable the operating system to access and use the device. The software could be provided either by Microsoft itself that will enable basic functionality, or by the device vendor who knows more about the specific model and hence will be able to provide a more tightly integrated device driver.

Normally, Windows Plug and Play will automatically detect the newly-added hardware, determine the system resources required and assign them properly. Plug and Play will also search for the required software drivers and install them transparently. If Plug and Play cannot find the required drivers, it will prompt the user to provide them by inserting the CD/floppy provided by the device manufacturer. Additionally, it will also reconfigure the system resources if required, for example when the newly added device requires some resources already in use.

In case of RAM module problems, you will usually be alerted by beeps from the BIOS. Strip the PC down to the ‘barebones’, that is, just the power supply, motherboard (with CPU & heat sink), minimum RAM and display card. Switch the RAM module to another slot. Verify that the RAM modules are as per the specs defined by motherboard manufacturer. Use matched RAM modules from the same manufacturer. Try a different RAM. If everything is working you should boot up and see the message ‘No boot device’ or something similar. Power off, connect the hard disk and reboot. If the problem still occurs, this points to something wrong with the hard disk or the basic boot up of the operating system. Check the storage section and the Windows troubleshooting section of this site.

If the OS boots normally, then power off and start adding each add-on card one by one, powering up after adding each card until you isolate the culprit. Check the relevant sections for troubleshooting hints for those components.

2. It may be a BIOS problem.
Check the BIOS section in this site.

2. The CPU may not be seated correctly.

This problem should only be relevant if you have installed a new motherboard or upgraded the CPU.

Visually inspect to check if the socket CPU is sitting flat in the socket, which means that the heat sink should be perfectly parallel to the motherboard. With a new socket CPU the heat sink may completely cover the CPU and you will have to remove the heat sink to check. Check for any crushed or bent legs. If the CPU’s socket locking arm was not raised up all the way up before seating the CPU or if it was not lowered all the way down after seating it, the CPU won’t sit properly. If the CPU doesn’t sit properly after this, then either the socket is faulty, or you have the wrong CPU for the motherboard!

It’s pretty difficult to tell by visual inspection if slot CPUs are seated properly. When in doubt, reseat the CPU, which is fairly easy since the heat sink and the CPU are an integrated unit. Also, make sure that you correctly identify release levers located on the top of the slot CPU package.

1. This could indicate a failing PSU that is not supplying power
correctly to the motherboard. You may be able to get the PSU
serviced but in most cases you will be better off getting a new
power supply.

2. This could be due to overheating of the PSU or CPU: If the PSU is
overheating, the metal cabinet may be hot to touch or you might
get a shock. Shut off immediately. Check if the PSU fan is working,
clean or replace the fan if not working or spinning very slowly.
If it’s a faulty PSU you may be able to service it.
If the PSU seems normal it might be due to an overheating CPU.

The PC powers on after the second or third try

The mostly likely problem is that the power_ok (or power_good) signal
is sent before the power supply has stabilised. Get a better quality
PSU. In modern PCs, the power switch is a logic device that tells
the PSU to supply full power to the motherboard. The power_ok signal
tells the motherboard that the power supply is available and
stable. If the signal is sent too soon the motherboard does not recognize
it and stays off to protect itself. This can happen in lowerquality
PSUs. Booting more than once is not recommended, and
you will be better off getting a better PSU.

The PC powers on but nothing happens after that (no beep)

1. This may be due to the addition of new hardware that is overtaxing
the power supply. Remove the last hardware component
installed and check again.
2. A defective hard disk or one that is not plugged in correctly:
Check the power cable to the hard disk. Sometimes it may not be
fully plugged in. Check the hard disk on another system.

The PC powers on, beeps and stops. No Power On SelfTest (POST) messages.

This may be a motherboard problem and not related to the PSU.
Check the motherboard section of this site.

The PC powers on and runs POST but there is no display

This may be a display card problem and not related to the PSU.
Check the display section of this site.

There is a squealing/whistling/whining noise when the PC starts

This could indicate either a problem with the fan, which has accumulated dirt over time, or one of the internal components of the PSU. Switch on the PC and listen carefully to confirm that it’s the
PSU fan and not the CPU fan or the hard disk. Usually, the noise will stop once the fan picks up speed, and you can ignore it temporarily.
It’s a good idea, however, to clean out the dirt around the PSU fan using a PC vacuum. This will increase the working life of the PSU fan as well as the PSU itself. If the fan stops working, the
PSU will generate heat and cause more trouble. So a little prevention will save you a lot of headaches later.

If the sound is not from the fan but from within the PSU itself, then you may be able to service it. A PSU has no ‘user-serviceable’ parts, and it’s best left to a competent technician, although in most cases of component failure, you will have to replace the PSU.

2. Incorrect voltage setting on the PSU: Select the proper voltage
setting (220-240V) on the back of the PSU. WARNING: If you have
switched on the PC with the voltage set to 110-120V and with a
mains supply of 240V you may have blown your PSU beyond
repair at worst or blown a fuse at best. Be careful!

3. The front panel power switch’s connector to the motherboard
is not fixed correctly or has come off or is defective: Check the
motherboard manual and fix the lead (wires) from the front
panel switch to the motherboard correctly. If there is still no
power, try a different lead.

4. The front panel power switch is defective: Replace the switch.
In case you do not want to get a replacement, one option is to use
the reset button. The only problem with this is that to cut the
power to the system in case of system hangs etc., you will have to
switch off the power from the mains wall outlet rather than
from the front panel.

5. The power supply connections to the motherboard are not correct:
Check the power connections from the PSU to the motherboard.
Refer to the motherboard manual and identify the correct
connection points.

6. Not identified; non-PSU related problem: After attempting all
the above, if the system still doesn’t power up, it is time to look
elsewhere.

Disconnect all the drives and see if it is powering up. (Note: Pull
out the power cord when removing or disconnecting
something.)

If the system is powering up, then start reconnecting the drives
one by one to identify which is defective drive.

If the system is not powering with all drives disconnected,
remove the other adaptors one at a time and checking to see if it
is powering up. Leave the video adaptor for the last.

If you are able to isolate the problem to one of the adaptor cards,
verify that the slot and the adaptor cards are compatible. Then
try plugging it into a different slot and see if the system powers
up before discarding it and going for a new one.

If the system is still not powering up, then you either have a
defective PSU or a defective motherboard. If there is a burnt
smell, then most probably either one of them has been fried.
Look for burn marks on the motherboard. Sometimes the PSU
and motherboard may be incompatible. If the motherboard looks
fine, replace the PSU, since it’s cheaper!

Check the relevant sections of this guide for troubleshooting
hints for the other components.

• The hardware does not have the requisite software drivers, andWindows is not able to determine the device type
• The driver is not compatible with the OS and hence it is not ableto inform Windows about the hardware. This is common if aWindows 9x/ME driver is installed on Windows 2000/XP.
• Each hardware component should normally communicate a basic device ID to Windows. If the hardware does not have this device ID or Windows does not recognise the device ID of the hardware, then the device is listed as unknown.

• First, boot the computer into Safe Mode. If the device is nolonger listed in Device Manager, then most likely it was a virtualdevice driver.
• Next, check the programs loaded at systemstartup (Start > Programs > Startup). By trial and error, disableeach program till you identify the software that is causing thedevice to be unknown. Uninstall and reinstall the software.
• Ifthese steps do not work, or if you suspect that the problem ishardware-related, remove hardware devices from your computer one at a time until Device Manager no longer lists theunknown device. Or, if you know what hardware is causing theerror, verify that the hardware is working and that you have all the correct and updated drivers for the OS. Install the driversthrough the Add Hardware Wizard.